| Item | Horizontal FRP Storage Tank | Selection / Engineering Note |
| Product Name | Horizontal FRP Storage Tank | Custom corrosion-resistant storage equipment |
| Typical Capacity Range | 1–160 m³ | Other dimensions can be engineered |
| Typical Diameter Range | D 1000–4500 mm | Other dimensions can be engineered |
| Main Sizing Dimension | Tank length L | See the three sizing-matrix sheets |
| Installation Orientation | Horizontal, aboveground; buried service only by specific design | Installation method depends on site and transport limits |
| Fabrication Method | Filament-wound shell with molded heads and reinforced saddle zones | Selected according to diameter, capacity and access |
| Structural Configuration | Inner corrosion barrier, structural laminate, outer protective layer and saddle reinforcement | Laminate schedule is project-specific |
| Resin Options | Same resin options, selected for the stored medium | Final resin must be checked against medium, concentration and temperature |
| Reinforcement | Surface veil, mat, woven roving and continuous winding roving | Glass type and content follow the laminate design |
| Design Pressure | Atmospheric as standard | Pressure or vacuum service requires a separate verified design |
| Operating Temperature | Designed according to resin system, medium and actual service conditions | Do not publish a single universal temperature limit without resin verification |
| Operating Medium | Water, wastewater, chemical liquids and selected industrial media | Chemical compatibility review is required |
| Design Specific Gravity | Project-specific; based on stored-liquid density and transport/support loads | Customer should provide normal and maximum density |
| Corrosion Barrier | Resin-rich inner surface with chemical-resistant veil and laminate | Barrier thickness and resin are selected for the medium |
| External Protection | UV-resistant resin-rich layer, gel coat or project coating | Colour and protection system can be customized |
| Tank Bottom / Supports | FRP or steel saddles with anchor arrangement | Foundation reactions must be confirmed by final design |
| Inlet and Outlet | Diameter, location, flange standard and reinforcement customized | Piping loads should not be transferred directly to the shell |
| Manhole | Top or side manhole customized | Access and maintenance requirements govern arrangement |
| Vent / Overflow | Vent and overflow connections as required | Sizing follows filling, emptying and process conditions |
| Optional Accessories | Saddles, hold-down straps, lifting lugs, level gauge, baffles and insulation | Accessory loads must be included in structural design |
| Inspection and Testing | Same, including saddle alignment and support inspection | Test scope follows contract and applicable code |
| Applicable References | Project specification and applicable RTP/FRP laminate standards | Reference does not imply certification unless contractually stated |
| Installation Method | Saddle-mounted installation; buried installation only with engineered backfill and external-load design | Installation manual and lifting plan should be project-specific |
| Application Fields | Industrial liquid storage, wastewater, chemical service, transport-limited sites and underground applications by design | Actual suitability depends on medium and hygiene requirements |
| Customization | Capacity, diameter, length, resin, saddles, nozzle layout and buried/aboveground arrangement | Manufacture according to approved drawings |
| Required Inquiry Data | Medium, concentration, temperature, density, capacity, support/burial condition and nozzle list | These inputs are required before final quotation and design |
English
