| Horizontal FRP Storage Tank | Selection / Engineering Note |
| Horizontal FRP Storage Tank | Custom corrosion-resistant storage equipment |
| 1–160 m³ | Other dimensions can be engineered |
| D 1000–4500 mm | Other dimensions can be engineered |
| Tank length L | See the three sizing-matrix sheets |
| Horizontal, aboveground; buried service only by specific design | Installation method depends on site and transport limits |
| Filament-wound shell with molded heads and reinforced saddle zones | Selected according to diameter, capacity and access |
| Inner corrosion barrier, structural laminate, outer protective layer and saddle reinforcement | Laminate schedule is project-specific |
| Same resin options, selected for the stored medium | Final resin must be checked against medium, concentration and temperature |
| Surface veil, mat, woven roving and continuous winding roving | Glass type and content follow the laminate design |
| Atmospheric as standard | Pressure or vacuum service requires a separate verified design |
| Designed according to resin system, medium and actual service conditions | Do not publish a single universal temperature limit without resin verification |
| Water, wastewater, chemical liquids and selected industrial media | Chemical compatibility review is required |
| Project-specific; based on stored-liquid density and transport/support loads | Customer should provide normal and maximum density |
| Resin-rich inner surface with chemical-resistant veil and laminate | Barrier thickness and resin are selected for the medium |
| UV-resistant resin-rich layer, gel coat or project coating | Colour and protection system can be customized |
| FRP or steel saddles with anchor arrangement | Foundation reactions must be confirmed by final design |
| Diameter, location, flange standard and reinforcement customized | Piping loads should not be transferred directly to the shell |
| Top or side manhole customized | Access and maintenance requirements govern arrangement |
| Vent and overflow connections as required | Sizing follows filling, emptying and process conditions |
| Saddles, hold-down straps, lifting lugs, level gauge, baffles and insulation | Accessory loads must be included in structural design |
| Same, including saddle alignment and support inspection | Test scope follows contract and applicable code |
| Project specification and applicable RTP/FRP laminate standards | Reference does not imply certification unless contractually stated |
| Saddle-mounted installation; buried installation only with engineered backfill and external-load design | Installation manual and lifting plan should be project-specific |
| Industrial liquid storage, wastewater, chemical service, transport-limited sites and underground applications by design | Actual suitability depends on medium and hygiene requirements |
| Capacity, diameter, length, resin, saddles, nozzle layout and buried/aboveground arrangement | Manufacture according to approved drawings |
| Medium, concentration, temperature, density, capacity, support/burial condition and nozzle list | These inputs are required before final quotation and design |
English
